The modification requires:
- A Marui G3 Type Magazine
- An electric drill
- A wooden hole saw, diameter 1.5 inches. We use this kind:
1. Disassemble the chassis
2. Prepare a wooden board for cutting the half hole. Drill 4 holes as follows:
3. Mount the chassis to the board, using the screws provided by the case
4. Cut the half hole by the hole saw, replace on both side of the chassis:
5. Now cut the square hole for the magazine
6. Cut the G-3 magazine as follows, and fix it to the little metal structure inside the chassis:
7. Reassemble back everything, here you go, simple hur!
Disclaimer
The Special Force Regiment makes no warranty, statement or representation, express or implied, with respect to the accuracy, availability, completeness or usefulness of the information, contained herein, and in so far as permitted by law, shall not have any legal liability or responsibility (including liability for negligence) for any loss, damage, or injury (including death) which may result, whether directly or indirectly, from the supply or use of such information.
